Perfect Collar & Ribbon Placement in Minutes
The Pin-iT Card is the original, stainless-steel, all-in-one military uniform alignment tool – built with branch-specific measurements pulled directly from each service’s uniform regulations manual. It fits in your wallet, will not break, and the etched, paint-filled guidelines won’t rub off when you need them the most.
Use code PIN10 at checkout for 10% off your order.
over the last 10+ years
Built for Anyone Who Wears the Uniform
Whether you’re active duty, Guard, Reserve, ROTC, JROTC, or a veteran, the Pin-iT Card gives you inspection-ready alignment every single time – without re-measuring or “eyeballing it.”
Every Pin-iT Card is designed around your service’s own uniform regulations manual, so spacing and placement are always correct.
Align collar devices, ribbons, badges, nameplates, and more in minutes – with clean, repeatable measurements you can trust.
Cut your dress uniform time way down. Perfect for short-notice events, boards, promotions, or fast morning inspections.
No more crooked devices in photos that last a lifetime. Look sharp at promotions, retirements, weddings, and official portraits.
Laser-cut from rugged stainless steel so it will not break, and slim enough to fit in your wallet, garment bag, or uniform case. Etched and paint-filled lines mean markings won’t rub off.
The Pin-iT Card helps place not only collar devices but all your uniform items on all your uniform garments. This is the only uniform measuring tool you will ever need.
Created by service members who got tired of bad tools and guesswork. No other uniform measuring guide competes with the versatility and accuracy of the Pin-iT Card.
Pin-iT Cards for Every U.S. Branch
Each Pin-iT Card is built with the specific regulation measurements for that branch. Pick your service below and we’ll send the correct card for your uniform.
Designed to simplify insignia, ribbons, and branch device placement on Army Service Uniforms.
Shop Army Pin-iT Card →Built around Navy uniform regs for collar devices, ribbons, warfare pins, and more – including cover alignment.
Shop Navy Pin-iT Card →Get razor-straight alignment for USMC ribbons and metal devices on dress blues and service alphas.
Shop Marine Corps Pin-iT Card →Built to keep Air Force devices and ribbons aligned to spec so you always look inspection-ready.
Shop Air Force Pin-iT Card →For Guardians who want sharp, precise device placement with zero guesswork.
Shop Space Force Pin-iT Card →Based on Coast Guard uniform manual measurements – perfect for inspections, boards, and photos.
Shop Coast Guard Pin-iT Card →How the Pin-iT Card Works
-
1Place the Card on Your Uniform
Lay the Pin-iT Card along your collar, pocket, cover, or coat in the position shown in the instructions for your branch and device.
-
2Pin Your Devices
Use the printed alignment lines and measurement marks to set your collar devices, ribbons, badges, or other uniform items perfectly.
-
3Remove the Card & Inspect
Remove the device from your garment, pull the card away, and check your uniform. Place the pins of the device back into the holes you created. Devices are now straight, even, and matched across both sides.
-
4Reuse Whenever You Need
Keep your Pin-iT Card in your garment bag, wallet, or case. Any time you re-set your uniform, you’ll be aligned in minutes – with one tool that works on all your garments.
The Pin-iT Card was created after years of fighting crooked devices, bad inspection tools, and “close enough” measurements. Every line, angle, and spacing mark is there for a reason.
It truly is the ultimate, all-in-one uniform tool – no other measuring guide or uniform ruler helps with as many garments, devices, and placements as the Pin-iT Card.
Pin-iT Card vs. “Eyeballing It”
You only get one shot at a first impression – especially in front of a board, commander, or promotion panel. Here’s why the Pin-iT Card belongs in every service member’s uniform kit.
- Uniform matches branch regulations every time.
- Devices line up perfectly on both sides.
- Faster, repeatable set-up with no re-do’s.
- One rugged, wallet-sized tool for all your uniforms.
- Guessing measurements with a ruler or tape.
- Crooked devices in photos that live forever.
- Stress before boards, promotions, or inspections.
- Cheap plastic tools that don’t match regs or help on every garment.
Get your branch-specific Pin-iT Card today and take the stress out of prepping your uniform. If you’re not completely satisfied, reach out and we’ll make it right. Your uniform – and your career – deserve precision.
Frequently Asked Questions
Does the Pin-iT Card work for multiple branches?
Each card is designed for a specific branch and based on that service’s uniform regulations. If you’ve served in more than one branch or help others with uniforms, we recommend owning the matching card for each branch you work with.
Can I use it for both ribbons and collar devices?
Yes. The Pin-iT Card is built to help you align collar devices and ribbons, and many service members also use it to confirm spacing on badges and other metal insignia, depending on their branch and uniform.
Is this approved by my branch?
The Pin-iT Card is a measuring and alignment tool. It doesn’t replace your uniform manual – it helps you follow it. All measurements are drawn from the uniform regulations for each branch.
How long does shipping take?
Orders typically ship quickly from our veteran-owned business. Exact delivery time will depend on your location and shipping method selected at checkout.